This is an old revision of the document!

Cameras

The VM03 mNVR uses IP as the video source RTSP cameras. You can read more about the RTSP protocol here:

Default IP camera settings:

  • codec type: H264
  • main stream extension: 1920×1080 Full HD
  • lower quality main stream extension: D1
  • key frame interval: 1..5s
  • frames per second (FPS): 20..25
  • bitrate type: СBR
  • main stream extension bitrate: 3000 kB/s
  • auxiliary stream bitrate: 600 kB/s
  • audio stream: disabled (for cameras without a microphone)
  • When using the H265 codec Live modes stream RTMP and HLS streams will be unavailable, and the processing time of the created files will increase due to the inability to play H265 in browsers.

Table 1 - Description of the camera status

Camera status Behavior
The camera is physically connected, but its processing is not enabledPhoto and video processing for this camera will not occur
The camera is not physically connected, its processing is enabledWhen you request a photo or video, the availability of the camera will be checked and in case of its absence, a file labeled No connection will be sent

IP cameras manager

Chapter help to add cameras for work with device, press Add camera button to automatically add camera, or Advanced button to do this manually, or press Start autoinit button to add ONLY the dahua camera automatically

Figure 1 – chapter IP cameras manager

Figure 2 – advanced IP camera adding

Table 2 – advanced IP camera adding parameters description

ParamterParameter description
Camera number Number of camera
Power stateON/OFF
Sound stateON/OFF
NameThe camera name
ІРCamera address
GatewayThe gateway of camera
Max current, mAThe maximum value of current that can flow on cameras
ManufacturerThe manufacturer of the camera

Figure 3 – editing camera window

You can check your parameters, change them, add new data or delete camera

To set the default settings, click the Default button. To save settings in NVR click Save settings button.