no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| — | en:vpnweb [2025/08/31 23:18] (current) – created - external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ==== VPN ==== | ||
| + | |||
| + | A VPN tunnel is required to enable remote device configuration, | ||
| + | |||
| + | By default, each device is connected to the bitrek.video VPN server. This allows you to remotely connect to the web interface, as well as view RMTP or HLS streams. | ||
| + | Bitrek provides a service of renting dedicated admin configured servers with all the necessary software and large storage for photo-video monitoring. Check with the managers for details. | ||
| + | |||
| + | Recommended OpenVPN server settings: | ||
| + | * forbidden to use ports: 20, | ||
| + | * client configuration file - .ovpn | ||
| + | * cipher – None | ||
| + | * port 1194 | ||
| + | * protocol – TCP | ||
| + | * forwarding setting - do not send all traffic through VPN | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ==== VPN ==== | ||
| + | |||
| + | __Figure 1__ – VPN configuration | ||
| + | |||
| + | {{ : | ||
| + | |||
| + | __Table 1__ – VPN parameter description | ||
| + | |||
| + | ^Parameter | ||
| + | |VPN client IP |the current address of the device on the VPN| | ||
| + | |VPN client .ovpn file |the current file to connect to the VPN| | ||
| + | |System VPN state |system VPN status| | ||
| + | |Client VPN state|streaming VPN status| | ||
| + | |||
| + | To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button. | ||
| + | |||