Table of Contents

LIVE STREAM

This section configures the ability to create a server streaming from IP cameras. Supported protocols are DASH and HLS.


Live stream configuration

Figure 1 – Live stream configuration

Here you can adjust the state of the streams from the camera cameras, turn on or off. Note! Then you can configure ONLY the streams ON!


Advanced configuration

Figure 2 – Advanced configuration

Table 1 – Advanced configuration parameters description

Parameter Parameter description
Camera Device camera number
HLS modeEnable HLS server for the specified camera
DASH mode Enable DASH server for the specified camera
Stream RTSP typeSelect the type of RTSP stream (first high-expansion stream, second low-expansion stream)
Stream linksLink to live broadcast from the camera

Note! You will not be able to update the link if no camera is turned on!

To set the default settings, click the Default button. To save settings in NVR click Save settings button.