==== SYSTEM ==== System settings – section with system settings such as: * Time zone; * Storage; * File names pattern; * System information sending interval; * URL of the server that receives system information; * NTP server settings; * Setting the device reboot time; * Ignition sensor settings; ---- ==== Time ==== __Figure 1__ – Time {{ :en:time.jpg?direct |}} __Table 1__ – Parameter Description of Time ^Parameter ^Parameter Description^ |Timezone |The time zone that will be set on the device| |DST time shift |The magnitude of the seasonal clock shift| |DST (Summer time)start|Daylight saving time setting| |DST (Winter time) end |Set clock to "winter time| ---- ==== System maintenance ==== __Figure 2__ – section System maintenance {{ :en:system_mantaince.jpg?direct |}} __Table 2__ – Parameter Description of System maintenance: ^Parameter ^Parameter Description^ |Storage file system format|Storage system format in the mNVR can be NTFS or EXT4| |Delete files policy|The amount of files(in percents) awter which the deletion begins| |Event files count|The number of files after which the deletion begins| |Files disk sharing |disk quota for files - the ratio of event files to loop files| |System reboot |The time when the device will reboot| |Sensor state|On or off ignition sensor and after turning off the ignition and the set time expires the device is turning off| |Timeout|Ignition sensor settings. When meaningful > 0 and no ignition after the specified time interval, the device will turn off. This sensor allows you to connect the device directly to the battery| |Disable IP cameras|Switching off the cameras in the absence of ignition| ---- ==== Files name pattern ==== – pattern for setting the name of the created file __Figure 3__ – section Files name pattern. {{ :en:files_name_pattern.jpg?direct |}} __Table 3__ – Description of the pattern for setting the name of the created file ^ Pattern ^ Pattern description ^ | %% | sign % | | %а | Local abbreviated name of the day of the week (for example, Sun) | | %А | Local full name of the day of the week (for example Monday) | | %b | Local abbreviated name of the month (for example, Jan) | | %B | Local full name of the month (for example, January) | | %c | Local data and time (for example, thur 18 Mar 2021 10:19:29) | | %C | Century; similarly %Y, except for the last two characters (for example, 21) | | %d | Day of a month (for example, 01) | | %D | Date; similarly %m/%d/%y | | %e | Day of a month, supplemented by spaces; similarly %_d | | %F | Full date ; equivalent %Y-%m-%d | | %g | The last two digits of the year, which corresponds to the week number according to ISO 8601 (look %G) | | %G |The year corresponding to the week number in the year according to ISO 8601 (look. %V); usually only makes sense in conjunction with %V | | %h | The same, that %b | | %H | Hour (00..23 | | %I | Hour (01..12) | | %j | The number of a day in year (001..366) | | %k | Hour (0..23) | | %l | Hour (1..12) | | %m | Month (01..12) | | %M | minute (00..59) | | %n | New line | | %N | nanoseconds (000000000..999999999) | | %p | Local equivalent AM or PM; empty if unknown | | %P | similarly %p, but only in lower case | | %r | Local 12-hour time (for example, 11:11:04 PM) | | %R | 24-hour format of hours and minutes; similarly %H:%M | | %s | the number of seconds that elapsed from 1970-01-01 00:00:00 UTC | | %S | second (00..60) | | %t | Tabulation | | %T | time; similarly %H:%M:%S | | %u | Day of the week (1..7); 1 means Monday | | %U | the number of the week in the year that begins on Sunday (00..53) | | %V | week number in the year beginning Monday, according to ISO 8601 (01..53) | | %w | Day of the week (0..6), 0 means Sunday | | %W | week number in the year beginning Monday (00..53) | | %x | Local date display (for example, 31.12.1999) | | %X | Local time display (for example, 23:13:48) | | %y | Last two digits of the year (00..99) | | %Y | Year | | %z | Time zone in format `+hhmm`( for example, -0400) | | %:z | Time zone in format `+hh:mm`( for example, -04:00) | | %::z | Time zone in format `+hh:mm:ss`( for example, -04:00:00) | | %:::z | Часовий пояс з достатньою кількістю двокрапок (наприклад, -04, +05:30) | | %Z | time zone with enough colons (for example, -04, +05:30) | The next parameters of mNVR are also used. __Table 4__ – mNVR settings to customize the name of the file being created ^Parameter^Parameter Description^ |#n |Camera number | |#c |Type of content | |#p |Number of the sensor | |#i |IMEI of the device | **Video files extension** – file extension format. MP4 format requires full file download for playback, MKV format supports playback of not fully downloaded files. MKV is recommended for poor communication quality ---- ==== Servers configuration ==== __Figure 4__ – section servers configuration {{ :en:server_configuration.jpg?direct |}} __Table 5__ – Parameter Description of servers configuration ^Parameter ^Parameter Description^ |URL |The URL of the server that processes and stores system information | |Interval |The interval of sending system information to a given server | |DNS server|IP address of the Internet server| |NTP server |Address and port of the NTP time synchronization server| |PORT |Port number| ---- ==== Cameras power management using VIN ==== __Figure 5__ – Cameras power management using VIN {{ :en:power_management.jpg?direct |}} __Table 6__ - Cameras power management using VIN parameter description ^Parameter ^Parameter Description^ |Power off voltage (8000-32000 mB)|The value of voltage when device is turning off (from 8 to 32V)| |Power on voltage (8000-32000 mB) |The value of voltage when device is turning on (from 8 to 32V)| |Power off time (0-65000 с)|Time at the set voltage after which the device switches off| |Power on time (0-65000 с)|Time at the set voltage after which the device switches on| To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.