====== LIVE STREAM ======

This section configures the ability to create a server
streaming from IP cameras. Supported protocols are **DASH** and **HLS**.

----

==== Live stream configuration ====

__Figure 1__ – Live stream configuration 

{{ :en:live_stream_configuration.jpg?direct |}}

Here you can adjust the state of the streams from the camera cameras, turn on or off. **Note!** Then you can configure ONLY the streams ON!
----

==== Advanced configuration ====

__Figure 2__ – Advanced configuration

{{ :en:advanced_live_configuration.jpg?direct |}}

__Table 1__ – Advanced configuration parameters description

^Parameter ^Parameter description^
|Camera |Device camera number|
|HLS mode|Enable HLS server for the specified camera|
|DASH mode |Enable DASH server for the specified camera|
|Stream RTSP type|Select the type of RTSP stream (first high-expansion stream, second low-expansion stream)|
|Stream links|Link to live broadcast from the camera|

**Note!** You will not be able to update the link if no camera is turned on!

To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.