====== TRACKER ======

In this section of the configuration site, you can enable a software tracker that allows:
- monitor the position of the mNVR and send data to the server via IPS;
- send photos to the server via IPS;
- send links to photos and videos linked to IPS coordinates.

----

==== Tracker setting ====

__Picture 1__ – Tracker settings

{{ :en:tracker_settings.jpg?direct |}}

__Table 1__ – Tracker settings parameters description

^Parameter^Parameters description^
|GPS antenna input|The type of tracker location, with the help of GPS antenna or static coordinates|
|GNSS module |Global navigation system module|
|Static coordinates  |Specified coordinates - for use without GPS antennas|
|Send photo by IPS|Sending a photo via IPS|
|Send link by IPS|Sending a link via IPS|
|Video path web link|Video web link|
|Video path preset|Presets of the link on which type of storage will be copied: FTP or cloud|
|Server plates recognition|Car plates recognition using API Bitrek|
|Server QR recognition|QR codes recognition using API Bitrek|
|Local QR recognition|QR codes recognition using mNVR|
|Live player|Link on the live stream|

----

==== Point creation and accelerometer sensitivity settings ====

__Figure 2__ - Point creation and accelerometer sensitivity settings

{{ :en:point_creation.jpg?direct |}}

__Table 2__ - Point creation and accelerometer sensitivity settings parameters description

^Parameter^Parameters description^
|Time|The value of the creation interval points by time|
|Distance|The value of the creation interval points on distance|
|Angle |The value of the creation interval points on angle|
|Min. speed|Max waiting time while continue connect on server, in case of exceeding timeout value, will be reconnection attempt on backup server |
|Accelerometer sensitivity|Sensitivity of mounted into device accelerometer|
|Auto stop timeout|If the device is not moving a set timeout, setting STOP value|

----

==== IPS servers settings ====

__Picture 3__ – IPS servers settings 

{{ :en:ips_server_settings.jpg?direct |}}

__Table 3__ – IPS servers settings parameters description 

^Parameter ^Parameter description^
|IP address  |IP address of the master server|
|Port |Port of the master server|
|ID|ID of the device of the master server|
|Password |device password on the main servers|
|Timeout |Timeout - no connection to server. When Timeout is exceeded will reconnect to Standby server |
|Standby server state|State of the standby server on/off|

----

==== Info ====

__Picture 4__ – Info

{{ :en:tracker_info.jpg?direct |}}

__Table 4__ – Info parameters description

^Parameter^Parameter description^
|LAT|Latitude|
|LON|Longitude|
|MOVE|Movement |
|SPEED|Speed of the tracker|
|ANGLE|GPS angle |
|DATA|GPS data|
|TIME|GPS time|
|HDOP|Horizontal dilution of precision|
|SATS|Satellite data |
|ALT|Altitude of the tracker|

To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.