====== Photo recorder ======

In this chapter you can set loop photo recording, check and set the camera state, and interval between recordings, and select the quality of the photo to be recorded.

__Figure 1__ – Chapter Photo recorder

{{ :en:photo_recorder.jpg?direct |}}

__Table 1__ – Photo recorder parameter description

^Parameter^Parameter description^
|Interval (s)|The interval between which will record a loop photo|
|Compression|The degree of photo compressing (the higher the percentage - the better the photo)|
|RTSP source|The quality of loop video which will record  |

To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.