This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== VPN ==== A VPN tunnel is required to enable remote device configuration, live stream viewing, and file storage in the repository. For this purpose in VM03 mNVR the VPN client OpenVPN is implemented. By default, each device is connected to the bitrek.video VPN server. This allows you to remotely connect to the web interface, as well as view RMTP or HLS streams. Bitrek provides a service of renting dedicated admin configured servers with all the necessary software and large storage for photo-video monitoring. Check with the managers for details. Recommended OpenVPN server settings: * forbidden to use ports: 20,21,80,123,443,1935,4430 * client configuration file - .ovpn * cipher – None * port 1194 * protocol – TCP * forwarding setting - do not send all traffic through VPN ---- ==== VPN ==== __Figure 1__ – VPN configuration {{ :en:vpn.jpg?direct |}} __Table 1__ – VPN parameter description ^Parameter ^Parameter description^ |VPN client IP |the current address of the device on the VPN| |VPN client .ovpn file |the current file to connect to the VPN| |System VPN state |system VPN status| |Client VPN state|streaming VPN status| To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.