This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Video recorder ====== In this chapter you can set loop video recording, check and set the camera state, and interval between recordings, and select the quality of the video to be recorded. __Figure 1__ – Chapter Loop video {{ :en:video_recorder.jpg?direct |}} __Table 1__ – Loop video parameter description ^Parameter^Parameter description^ |Interval (s)|The interval between which will record a cyclic video| |RTSP source|The quality of loop video which will record| To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.