This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== LIVE STREAM ====== This section configures the ability to create a server streaming from IP cameras. Supported protocols are **DASH** and **HLS**. ---- ==== Live stream configuration ==== __Figure 1__ – Live stream configuration {{ :en:live_stream_configuration.jpg?direct |}} Here you can adjust the state of the streams from the camera cameras, turn on or off. **Note!** Then you can configure ONLY the streams ON! ---- ==== Advanced configuration ==== __Figure 2__ – Advanced configuration {{ :en:advanced_live_configuration.jpg?direct |}} __Table 1__ – Advanced configuration parameters description ^Parameter ^Parameter description^ |Camera |Device camera number| |HLS mode|Enable HLS server for the specified camera| |DASH mode |Enable DASH server for the specified camera| |Stream RTSP type|Select the type of RTSP stream (first high-expansion stream, second low-expansion stream)| |Stream links|Link to live broadcast from the camera| **Note!** You will not be able to update the link if no camera is turned on! To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.