no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


—en:trackers [2025/08/31 23:18] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +====== TRACKER ======
  
 +In this section of the configuration site, you can enable a software tracker that allows:
 +- monitor the position of the mNVR and send data to the server via IPS;
 +- send photos to the server via IPS;
 +- send links to photos and videos linked to IPS coordinates.
 +
 +----
 +
 +==== Tracker setting ====
 +
 +__Picture 1__ – Tracker settings
 +
 +{{ :en:tracker_settings.jpg?direct |}}
 +
 +__Table 1__ – Tracker settings parameters description
 +
 +^Parameter^Parameters description^
 +|GPS antenna input|The type of tracker location, with the help of GPS antenna or static coordinates|
 +|GNSS module |Global navigation system module|
 +|Static coordinates  |Specified coordinates - for use without GPS antennas|
 +|Send photo by IPS|Sending a photo via IPS|
 +|Send link by IPS|Sending a link via IPS|
 +|Video path web link|Video web link|
 +|Video path preset|Presets of the link on which type of storage will be copied: FTP or cloud|
 +|Server plates recognition|Car plates recognition using API Bitrek|
 +|Server QR recognition|QR codes recognition using API Bitrek|
 +|Local QR recognition|QR codes recognition using mNVR|
 +|Live player|Link on the live stream|
 +
 +----
 +
 +==== Point creation and accelerometer sensitivity settings ====
 +
 +__Figure 2__ - Point creation and accelerometer sensitivity settings
 +
 +{{ :en:point_creation.jpg?direct |}}
 +
 +__Table 2__ - Point creation and accelerometer sensitivity settings parameters description
 +
 +^Parameter^Parameters description^
 +|Time|The value of the creation interval points by time|
 +|Distance|The value of the creation interval points on distance|
 +|Angle |The value of the creation interval points on angle|
 +|Min. speed|Max waiting time while continue connect on server, in case of exceeding timeout value, will be reconnection attempt on backup server |
 +|Accelerometer sensitivity|Sensitivity of mounted into device accelerometer|
 +|Auto stop timeout|If the device is not moving a set timeout, setting STOP value|
 +
 +----
 +
 +==== IPS servers settings ====
 +
 +__Picture 3__ – IPS servers settings 
 +
 +{{ :en:ips_server_settings.jpg?direct |}}
 +
 +__Table 3__ – IPS servers settings parameters description 
 +
 +^Parameter ^Parameter description^
 +|IP address  |IP address of the master server|
 +|Port |Port of the master server|
 +|ID|ID of the device of the master server|
 +|Password |device password on the main servers|
 +|Timeout |Timeout - no connection to server. When Timeout is exceeded will reconnect to Standby server |
 +|Standby server state|State of the standby server on/off|
 +
 +----
 +
 +==== Info ====
 +
 +__Picture 4__ – Info
 +
 +{{ :en:tracker_info.jpg?direct |}}
 +
 +__Table 4__ – Info parameters description
 +
 +^Parameter^Parameter description^
 +|LAT|Latitude|
 +|LON|Longitude|
 +|MOVE|Movement |
 +|SPEED|Speed of the tracker|
 +|ANGLE|GPS angle |
 +|DATA|GPS data|
 +|TIME|GPS time|
 +|HDOP|Horizontal dilution of precision|
 +|SATS|Satellite data |
 +|ALT|Altitude of the tracker|
 +
 +To set the default settings, click the **Default** button. To save settings in NVR click **Save settings** button.